Black Hematite Pendant
Sometimes there is a need for new jewelry, and the best solution will be to do something new with your own hands! You can vary your image and complement the clothes of blue and black colors. This pendant is especially suitable for a dress. For the manufacture of such a pendant, you will need hematite 3 cm long and with a hole inside the stone, also beads with a diameter of 4 mm, thick wire with a diameter of 1 mm and a length of 12 cm, then a thinner wire with a diameter of 0.7 mm and a length of 8 cm and thin wire with a diameter of 0 , 1 mm in length 50 cm. 1. First, we use a thick wire to create the base of our pendant: to do this, put our stone black hematite on the wire, leave the end of the wire 3 cm long and bend the wire to the left around the stone. Then we move from point 1 to point 2: to do this, we make a loop around the remaining free end of the wire and bend the wire to the right of the stone. You can bend it with your hands, because the wire is copper and quite soft.At the end we wrap a beautiful bend with round pliers, like a treble clef.
2. After that, the remaining end of the wire is wrapped with round pliers so that a loop is formed to hang our pendant.
3. We bend the wire beautifully around the eyelet and cut off the unnecessary
4. Now it is the turn of the wire that is thinner: we bend an eyelet at the base with round-nose pliers and string beads on it. With the thinnest wire we fasten the wire thinner to the base of the pendant by 2-3 turns and for beauty under the beads there are 5 turns.
5. Then we go through to the end. The result is visible in the photo. In the end, we make a small loop at the end of a thin wire, the same as in the beginning.
Sculpt a cute monkeyNewspaper Photo FrameBrowser gameSavings on repairs60Liver CakeSonata Mobel Orthopedic MattressRepair mixer in the kitchen