Copper synthesis

Each of us tries to improve our comfort, especially when it comes to home and your desire to do something with your own hands. Isn't it great when you can surprise others with your unique works and catch the admiring glances of guests? So, today we will look at how to make a flower of copper with LED lighting and fluorite inside. First, let's prepare all the necessary tools. We will need: a soldering station (it is better than just a soldering iron because it also has a hairdryer, which is useful when heating and rolling copper sheets), copper sheet:
 Copper synthesis

A flower template (you can draw it yourself, or find and print it on the Internet), epoxy and a thickener for it, a LED, a small piece of fluorite stone, or another, if you don’t want the flower's “heart” to glow inside, thanks to the LED, two wires longer than the stem of the flower, pliers and 1 CR2032 battery
 Copper synthesis
That's it, we can start.To begin with, we take a leaf of copper, measuring 10 * 15 cm, warm it with a hairdryer or with an iron and roll it out on a flat surface. This will be our stalk. After that, we put in the center of the sheet 2 wires, with previously cleaned edges (they will be soldered to the LED from one end and to the batteries from the other). Do not forget that the wires should be slightly longer than 10 cm. Take the rod from the handle or another long round object, warm the copper sheet again and roll the sheet into a tube. Our stem is ready. Getting to the inflorescence and leaves for the stem. We print the sheets on paper and draw a contour from them on copper, heat them with copper, cut them out.
Copper synthesis
 Copper synthesis
 Copper Synthesis
>img src="https://sdelaysam-svoimirukami.ru/images/6/673-mednyy-sintez.jpg" alt="Copper synthesis" title="Copper synthesis">
Copper synthesis
 Copper Synthesis
Take a soldering iron in your hands, tin and solder the sheets to the trunk. Now prepare 3 or 4 (depending on the desired “fluffiness”) a piece of copper, 5 * 5 in size. By analogy with the leaves, we outline a pattern of a flower on copper.Cut them, not cutting to the end. We put our sheets on one another and while they are still flat, but already with a cut out flower, we punch a hole through the middle. You can break through with anything, it is not difficult. Getting to the most interesting part. We take our stem with leaves, inflorescence and soldering iron. Wires that come out of the stem, plant through the hole in the inflorescence. Solder the inflorescence to the stem. We solder the LED to the wires in the inflorescence. We glue fluorite on the LED: Now we turn our inflorescence by turning, giving the petals the desired look. We begin to do now stand for our flower. Take a glass or stack and circle its outline on the copper.
Copper synthesis
Cut. Now take a cut copper tape, 1-1.5 cm wide along the length of the circle. We take hot melt or epoxy and glue the circle to the copper tape, warming it up with a hairdryer for a quicker result. In the middle of the circle, punch a hole and start the wires from the stem into it. Solder the stand to the flower. We solder the battery to the wires and fill them with wax in the stand. Done! Good ideas and good mood!


Related News:


Marble Envelope Paper
Cockerel
Hanging candle holder of cans
Replacing the screwdriver batteries
20 Enchanting Birdhouses for Well-Being Birds. Master Class
Air Dryer
Rose for hair
How to tie a Celtic knot or a knot of luck