Homemade plow for plowing
A self-made plow is a universal invention that is suitable for both plowing and planting potatoes. The plow can be made independently of the available materials. The proposed model of the plow consists of a control unit and a device designed for plowing. The control unit is a stand, which consists of the main control elements and accessories. Namely: 1 - rectifying bridge (power supply unit). 2 - electric motor. 3 - gearbox combined with gear. 4 - cable - 5 mm, acting as a winch.5 - anchor (working part from a shovel).A plow that is designed for plowing the land consists of the following elements: 1 - steering wheel (plow control lever). 2 - plowshare. 3 - base with fasteners.Installation and connection of the plow. 1.Anchor must be set at an angle for a better stop.2. After that, the anchor should be deepened into the ground to the connecting plate.3. Then the anchor is attached to the control device using a piece of armature.4. Before the barrier bar near the cable also drive in rebar. In addition, she will keep the control unit in place during operation.5. In the working position, the gearbox is in the engaged position.6. The control unit is ready for operation.7.After installing and securing the control device, a plow should be attached to it. To do this, the free end of the cable is attached to the base of the plow.Principle of operation and operation. 1 . Plow carried to the desired distance. 2. The ploughshare is driven into the ground to the required depth.3. The left leg is set on the plowshare, and the right leg rests on the ground.4. Thus, while the plow is moving along the ground, the plowman pushes with his right foot and controls the plow with his weight.5. During operation, the wheel of the plow must not exceed the level of the tiller's belt.6.When the plow reaches the end of plowing, the control unit is switched off and the plow is again placed on the opposite side of the plot. A plow made according to this principle is capable of plowing the land, which has been left for a long time without leaving.The plowed land has smooth and deep furrows.After plowing the land should be treated with a harrow. This is done to break ground blocks. To do this, instead of a plow, a harrow is attached to the control unit.
What did the stars look like on their first carpets?
Control Panel to computer
Office romance: good or bad
Roses from corrugated paper
Knitted motley costume for a 25 cm-long doll doll
Cute Sock Bunny
New mirror from an old pan