Did you buy a light transparent curtain in the store, knowing that it wouldn't fit in height?
To hem it will take: scissors, needles for stitching, sewing threads, ruler and marker for working on fabric. First you need to decide on the height of the curtain, in our version the fabric will be lie a little on the floor. On a small section of the fabric with needles to fix the height of the curtain.
Remove the curtain, spread it out on a clean floor. A ruler to measure how much the veil will be shortened. Turn it along the entire length, securing it with needles.
Cut off the excess fabric, stepping back from the bend by 5 cm. Veil is easy to cut off exactly if it is outdoor the coating has straight lines.This fabric is very thin and well shows through the lines on the floor, which can be used instead of a ruler. If this is not possible, then you need to postpone the bending with a ruler 5 cm along the entire length of the veil to work on the fabric.
Now on a small piece of fabric should be marked with needles in the middle of the hem, using them as reference points.
Remove previously pricked needles and perform a double hem rnut fabric twice). Bend up with needles, removing needles at the fold.
Since we are not going to put fabric on, we need to pin the needles more often so that the fabric does not move out under the sewing machine foot.
So, tuck the entire length of the veil. Bend the stitch into a machine with a straight stitch.
Through every 20-30 stitched centimeters need to remove needles,in order not to lose them during the sewing process.
After work is finished, cut off the extra work threads. Light transparent curtain is ready!