This master class will help us to make not just an ordinary leather cover, which can be bought at any store, namely, a cover with a beautiful, glamorous lady who will be perfectly combined with you, or with the girl for whom you want to make such a gift. To make a leather cover, we need to take: • A piece of leather measuring 20 * 30 cm; • Sintepon; • White cardboard; • • Two blanks of binding cardboard with a size of 9.5 * 13.4 cm; • The inscription passport and a picture with a spectacular girl, printed on a color printer, and then laminated (this can be done in any photo studio); • • Bronze-colored metal pendant Eiffel Tower; • Brads monophonic purple and in silver frame with red stone; • Paper for scrapbooking; • Glue with the effect of double-sided tape; • Glue howling pencil; • Scissors; • Ruler and pencil; • Double-sided adhesive tape; • • Passport for the sample; • Thread with a needle; • Sewing machine; • Maroon threads.
So, proceed to the first stage, the production of cardboard backing for the cover. I want to warn at once that the thickness of the product is decent, so the machine should be sewn thick layer. We put two binding rectangles of 9.5 * 13.4 cm, cut out a strip of white dense cardboard 5.5 * 13.4 cm. We divide the cardboard strip into three parts 2.5 * 0.5 * 2.5 cm and bigey (draw lines bending).
Now on both sides we spread this strip with glue pencil and glue it on the binding cardboard, we join in the cover.
Now we cut off a piece of leather so that we have two pockets 5.5 cm each and 19.8 wide for the cover itself, and the height measure 18.5 cm, leaving on the gateways.
Now measure off a piece of padding polyester for the size of the binding blanks. We glue synthetic winterizer using pieces of double-sided tape.
Now, the sides of the leather cut are twisted and marked with a thread with a needle.
Now you need a little imagination, wrap the skin on top and on the sides, in order to figure out where we place the picture and the words" Passport ". Double-sided strips of adhesive tape sticking an inscription and a picture of a girl. We laminate the pictures so that the cover will not be rubbed or soaked when worn.
Sew on and picture, and the inscription on a typewriter white thread. Now we cut a flower out of leather, insert brads with a stone into it, and fasten the tower in the upper corner with the help of a metal brads.
We sew the sides of the cover with a burgundy thread. Turn over a piece of leather face down and put the cardboard blank. Now we need to glue the twists using a glue stick.
We spread the upper part, press it well and hold it slightly under the press, then do the same from below. Now we catch the machine turns the top and bottom on both sides. We cut off the cut from the scrap paper, 13.2 * 19.3 cm.
We spread the entire cardboard surface with glue pencil and glue the scrap blank, smooth and press.
Now we stretch and turn the sides. In several places, we catch a manual needle.Now we cover the entire cover in a circle with a burgundy thread.
We clean out marks carefully and ready. It remains only to pack a gift or put in your passport. Thank you for your attention!
Homemade kozinakiDecorative arrangement of branchesCarambola - Fruit GrowingA birthday present for your grandmotherHome Chips