Simple stand for grinders

A very simple stand for the grinder can be made of just a few pieces of a rectangular profile in a couple of tens of minutes. And at the end you get an excellent cutting machine, with which you can cut metal billets smoothly and quickly.

You need it for a cutting machine

  • Rectangular profile.
  • Steel rectangular plate for base.
  • Spring.
  • Bolt with nut.
  • Rectangular plate from DSP.
From the profile of the angle grinder, cut off the blanks: two small equal segments and one long one for the handle.
>img src="https://sdelaysam-svoimirukami.ru/uploads/posts/2018-05/medium/1526034324_1.jpg" style="max-width: 100%;" alt="Simple stand for Bulgarian">
Take two pieces of the profile.
Simple stand for grinders
Install them on a rectangular plate. The distance between them is slightly larger than the width of the profile width.
Simple stand for grinders
Weld to steel plate.
Simple stand for grinders
In order for the stand to have more weight and be stable, we place it all on a rectangle of particle board.Of course, instead of all this, you could take a thick steel plate.
Simple stand for grinders
Screw the steel base to the wooden one in several places, after making holes in the steel plate.
Simple stand for grinders
To attach the handle, you need to drill a through hole in all three segments. See the photo: A simple stand for a Bulgarian
We drill a hole for a bolt. Simple stand for the Bulgarian Insert the bolt and fix the nut.
Simple stand for Bulgarian
In order for the Bulgarian itself to rise up to its original position, it is necessary to introduce a return spring into the system. Similar can be found in the braking system of a car.
Simple stand for grinders
Drill two holes and hang the spring. If the lifting force is not sufficient - enter another spring.
Simple stand for grinders
Now, how to hang a grinder, you must make a hole in the handle of the profile.Pre-try on the grinder to the installation site.
Simple stand for Bulgarian
Simple stand for Bulgarian
Screw the grinder. There is a threaded hole in almost all angle grinders where the handle is screwed.
Simple stand for grinders
That's it - the cutting machine is ready. The design is very stable and reliable. Cuts excellent.
Simple stand for Bulgarian
This example uses a small Bulgarian.
Simple stand for Bulgarian
Simple stand for Bulgarian
At any time, the tool can be removed and used as usual. Such a stand will definitely come in handy. It will make your work easier when, say, you need to make a lot of vertical cuts. A useful thing, a minimum of costs and time - the effect is obvious.

Related News:


How to choose a design studio for creating a dream interior
Make beautiful paper for cards
Paper Flowers
Rocking picture
Cat game
Making cold porcelain for sculpting