Socks and mittens with braids and pompons

We knit with knitting needles very beautiful and warmSocks and mittens decorated with braids and pompons.

Materials and tools:

for socks:

  1. yarn (65% wool, 35% alpaca, 50g / 75m) 150-200-200 g light gray color, 50-50-50 g color close to white;
  2. nosochnye (double-edged) knitting needles 4 mm (or the size required for a knitting density of 19p x 25p front smooth = 10 x 10 cm);
  3. socks (double-pointed) 3.5 mm knitting needles for elastic.

for mittens:

  1. yarn 100-100 g color light gray, 50-50 g color close to white
  2. nosochnye (double-edged) knitting needles 4 mm (or the size required for a knitting density of 19p x 25p front smooth = 10 x 10 cm);
  3. Double-sided knitting needles DROPS 3 mm for rubber bands

Pattern Description

Scheme: see the diagram A.1.

Description for socks

Giving hint

We subtract 1 loop as follows (starting from 2 loops to the mark): remove 1 loop as front, 1 faces. etc., stretch through the removed.

After the label we reduce it like this: 2 people together.  

Heaving Supports

We make heels for the heel while knitting with the face:  

Row 1 (= front side): knit until 5-6-6 loops remain, transfer the next loop as faces, 1 faces. p., draw through the removed, turn knitting;

Row 2 (= wrong side): knit until 5-6-6 loops remain, transfer the next loop as izn., 1 izn. p., draw through the removed, turn knitting;

Row 3 (= front side): knit until 4-5-5 loops remain, transfer the next loop as faces, 1 faces. p., draw through the removed, turn knitting;

Row 4 (= seamy side): knit until 4-5-5 loops remain, transfer the next loop as izn., 1 izn. p., draw through the removed, turn knitting.

We continue to decrease in this way, each time reducing the number of loops by 1 before each decreasing, until 10-10-12 loops remain on the needles.

Dimensions: 35 / 37-38 / 40-41 / 43

Foot length: 22-24-27 cm

Sock length: 24-25-26 cm

Description for mittens

Hint for increases

We add loops, making 1 nakid, in the next row we knit nakid faces. crossed loop to avoid a hole.

Giving hint

We reduce loops as follows (starting from 3 loops to the mark): 2 together faces., 2 faces. n. (label between these 2 loops), remove 1 loop as faces., 1 faces. p., pull through the shot.  

Sizes: S / M-M / L

Knitting description

Sock

We knit in a circle on the toe (double-edged) knitting needles from top to bottom.  

We collect on the toes (double-pointed) 3.5 mm knitting needles with 56-56-64 loops. We knit a number of people. p., fasten 1 label in 1 loop of the beginning of the row = middle of the back of the leg, knit with an elastic band = 2 des./ 2 persons.

When the length of the gum reaches 4-5-5 cm, go to the toes (double-edged) 4 mm knitting needles and knit the following row in this way: 20-20-24 loops of people. satin stitch, at the same time diminish 4-1-2 loops evenly, 2 res. p., 4 persons. n., 2 together izn., 4 persons. n., 2 out. pp. 22-22-26 loop faces. stitch, simultaneously decreasing uniformly 6-3-4 loops = 45-51-57 loops on the spokes.

We knit the following row in this way: * 2 people together. p., 1 nakid *, repeat * - * until the end of the row and finish 1 person. p.

We knit the next row in this way (we knit knit faces). We knit 16-19-22 loops of faces. stitch, A.1 (= 13 loops) - see the description above and 16-19-22 loops of individuals. satin stitch. We continue in the same way, simultaneously decreasing for different sizes in the following way:

Size 35/37: continue to knit without a hitch.

Size 38/40: at a height of 9 and 16 cm, we subtract 1 loops on each side of the loop with a label - see Hint for socks.

Size 41/43: at the height of 8, 13 and 18 cm we subtract 1 loop from each side of the loop with the label - see the tip for the socks = 45-47-51 sts.  

All dimensions: we knit until the length of the product is 24-25-26 cm. Now leave the first 9-10-11 loops on the spokes, transfer the following 27-27-29 loops to the loop holder (= middle of the upper parts of the sock) and leave the last 9-10-11 loops on the needles = 18-20-22 loops for the heel.

We knit people. stitch on the heel loops for 5-5 1 / 2-6 cm. We put 1 tag and measure it from here. Now we are making allowances for the heel - see Heel adjustments. After decreasing for the heel, type 10-11-11 loops on each side of the heel and transfer 27-27-29 loops from the loop holder back to the spokes = 57-59-63 loops. We put on the label on each side from 27-27-29 loops from the holder for loops.

Next, knit people. smoothing in a circle and according to scheme A.1 as before, at the same time we reduce on each side in each 2nd row a total of 8-8-8 times in this way: we knit together people. crossed the last 2 loops before the first mark on the top of the sock (i.e.we knit the hinges behind the back of the loop, not the front ones) and we knit together the faces. the first 2 loops after the last mark on the top of the sock = 41-43-47 loop.

We knit until the length is 18-20-22 cm from the mark on the heel (= approximately 4-4-5 cm remain). We put on 1 tag on each side so that on the upper part of the leg we have 21-21-23 loop and 22-22-24 loops on the lower part of the leg. We continue under the scheme A.1 and individuals. smooth, and then subtract for the fingers on either side of both marks. Thus we reduce (starting from 3 loops up to the mark) for each tag: 2 persons together. p., 2 persons. n. (the label is between these 2 loops), remove 1 loop as individuals., 1 persons. p., pull through the shot. Do this in this way on each side in each 2nd row a total of 5-5-6 times and then in each row a total of 3-3-3 times = there are 9-11-11 stitches on the spokes. &Nbsp;

Cut the thread and pull it through the remaining loops, tighten and fasten.

We knit the second sock in the same way.

Laces

Cut off 2 threads of white color, 3 m long each. We twist the threads, fold them in half and then twist again. We tie knots on each side.

Pull the string through the holes in the sock. We make 2 pompons from white yarn with a diameter of about 2 cm.Fasten pompons on each side of the lace.

Repeat with the second toe.

Mittens

Right mitt

We collect 3 mm 40-40 loops on the nostril (double-edged) needles with 40-40 loops of light gray yarn and knit 1 row of faces. Next, knit gum (= 2 p. / 2 external.).

When the gum height is 6-7 cm, we knit the following row as follows: * 5 faces. p., the next 2 loops tying together persons. n. *, repeat * - * 2 more times, 2 rel. p., * 2 together persons. p., 2 persons. n. *, repeat * - * 2 more times, 2 rel. etc., we finish 3 persons. t. = 34-34 p.

Change the knitting needles for toes (double-edged) knitting needles 4 mm, knitting the following row in this way: * 2 persons together. n., 1 napkin *, repeat * - * to the end of the series. We knit the next row as follows (we knit knit faces. P.): 18 loops of faces. smooth (= palm), scheme A.1 (= 13 loops) and 3 person loops. satin stitch. We continue in the same way.

At a height of 13-14 cm, we add 1 loop on each side of the first loop in the row for a finger - see the hint for gains for mittens. Repeat the increments on each side of the loop of increments in each 2nd row another 4-5 times = 44-46 loops. Now we transfer 11-13 loops of a finger on the holder for loops. We continue to knit in a circle as before, at the same time we type 1 new loop after the finger in the next row = 34-34 loops.

When the length of the mitten is about 26-28 cm (if necessary, try on the mitten, it remains about 4 cm to the end), put 1 mark after the first 16 loops and another 1 mark after the next 17 loops (1 loop remains after the last mark). Now we reduce by 1 loop on each side of both labels - see Hint for mittens. We repeat the reductions in each 2nd row 2 more times and then in each row 3 more times = 10 loops remain on the needles. &Nbsp;

Cut the thread and pull it through the remaining loops, tighten it together and fasten the thread.

Finger

We transfer 11-13 loops of a finger back to nosochny (two-edged) spokes of 4 mm. Additionally, we type 4-3 loops for a finger = 15-16 loops. We knit people. stitch until the length of the finger is about 4 1 / 2-5 cm (try on the mitten, it remains about 1/2 cm to the end). We knit 2 rows of people. n. simultaneously knit loops in both rows of 2 persons together. = 4-4 loops remain on the spokes.  

Cut the thread and pull it through the remaining loops, tighten and fasten.

Left Mitten

We collect loops and knit as right only in mirror image - i.e. begin gum with 2 int. p. (instead of 2 persons. p.)

First row after the gum knit as follows: 3 persons. n., 2 out.p., * 2 together persons. p., 2 persons. n. *, we repeat * - * 2 more times, 2 persons together., 2 isn. p., * 2 together persons. p., 5 persons. n. *, repeat * - * 2 more times.

Change the knitting needles for nosochnye (double-edged) knitting needles 4 mm, knit the following row thus: 3 loops of persons. stitch, A.1 (= 13 loops) and 18 loops faces. satin stitch. We make gains for the finger on each side of the last loop in the row. Before lowering the top of the mitten, we put the 1st mark after the 1st loop in the row and the 2nd mark after the next 17 loops (= 16 loops left after the last mark).

Laces

Cut off 2 threads of white color 2.5 m long each. We twist the threads, fold them in half and then twist again. We tie knots on each side.

Pull the string through the holes in the mittens. We make 2 pompoms from white yarn with a diameter of about 2 cm. Fasten the pompons on each side of the lace.

Repeat with the second mitten.



Related News:


The advantages of beading
Booties-ruffles
Plastic Bottle Wi-Fi Booster
Why is the pet coughing
Do-it-yourself can decor
Handicraft docking station
8 dresses worth taking on vacation