We create three-dimensional pictures of cardboard "House in the village"

Want a house in the village? This is not just a picture, this is a relief that you want to touch.
To create a relief with the image of a village house is not at all difficult.
This technique was tested in an art school with children 12 years old. Join now! “Build” a house is fun.

We will need:

- wooden frame with fiberboard or cardboard;

- PVA glue;

- acrylic filler;

- acrylic primer or white acrylic or water-based paint;

- oil paints, acrylic or watercolor (depends on the soil);

- a palette knife or a thin spatula;

- medium-sized cardboard;

- a piece of cotton or sintepon.

The lead time is indicated without drying. It takes from 2 to several days until the paint dries completely.

For a basis, you can take a photo of your holiday home. The main thing is to see two sides, the angular position. Add details: porch or porch, attic.

Prepare the frame. I will have two jobs for example.Cut out from a hardboard or thick cardboard background for the picture. Plastic will not work. Finished frames come with a finished carton. Turn the frame and glue the dvp or cardboard. Glue using PVA extra. We put the top load. It is advisable to do this in advance.

After the glue dries, turn the frame over. Pencil make drawing structure.

Cut out all the details of the house of cardboard of average thickness.

We must start with the main walls and roof. Then extensions and attics are cut. Windows and doors can be cut (better) or cut a separate part - a rectangle.

In this paper, the roof of one piece with a bend. Side wall is replaced by an extension - one detail with a bend.

Cooking filler mix. Putting putty in a separate container. Putty need thick, not spreading.

On the putty pour glue pva about 20-30%. By the eye. Use a palette knife or a thin spatula.

Next, apply a palette knife putty mixture to work from the sky. The gap near the frame close up. Especially smooth the sky is not necessary. We got to the house. If you started working with the mixture, do not leave work for a long time. After a while, the mixture will start to dry out.

We begin to grease the walls. The corner of the house should be convex, so in this place the mixture is applied more.

So we pack the main parts of the house. If there is a pipe and her too. The roof should hang over the wall and go on it. The edges of the house to the left, to the right and top are pressed to the base. The corner of the house and the bottom is protruding.

Now the mixture is coated with all the details on top. All joints should be smeared. Look from the sides and from above.

We attach the following details - the attic. As you move down, scratch the parts on the pipe and roof. Mark the crown and branches of trees.

The final detail is a veranda. The angle of it must also be convex.

Smeared the entire house, leveled and do not forget to put the details. This can be done with a toothpick.

Similarly, we are working with the second house.

Ready and the second. At this stage you can take a break. To drink tea.

Have a rest? Now with a thin spatula or a syringe without a needle, we make convex details: tree branches and snow. Did not I tell you that the houses will be winter? Then I inform you that the snow will be on the roof, on the windows, on the pipe and snowflakes in the air.

It remains to make the bottom. This can be done with a piece of cotton wool, padding polyester.We put the putty mixture under the sintepon and on the top.

In the foreground, squeeze several branches and a bush with a syringe.

That's ready and the second house. Now let it dry. My tools and hands. Work better put on the battery. Let him rest until the next day.

Before painting, the frame is cleaned from the putty mixture, and the work is primed. It can be done with acrylic primer, acrylic paint and water-based paint. In the future, on acrylic primer you can work with oil paint, acrylic, and on water-based - watercolor and acrylic. The frame is better to paint over.

If you like white reliefs, then you can stop.

Work in color. You can choose different colors. Here is an example using oil paints. Paints are applied liquid, using a diluent for oil paints. Acrylic or watercolor with water. Choice of color at will. The frame is painted over.

Snow is painting over.

On the convex places and snow rubbed with a cloth (for oil paints). White paint paint details: window frames, branches, snowflakes and snow. Dark color can shade windows, roof, snow caps. The work is completed. It remains to dry.



Related News:


How to activate coal
How to tie a beret
Wedding pillow with a rose
Sculpt a cute monkey
Steel Phone Hard Case
Apple liqueur - recipe
Quilling Flowers